Constant temperature drying furnace is not common in daily life, generally used in laboratories, industry, biochemistry, school research units and so on. Then, how to use the constant temperature drying furnace safely?
Take GWL series constant temperature drying furnace as an example, the studio is equipped with heating pipe, the rear is equipped with air blowing device, the temperature controller controls the temperature constant and high and low, the heating pipe is heated and the air blowing device circulates when working, and the temperature sensor is built-in.
Refer to the following method, you can safely use the constant temperature drying furnace.
1. Before power on, please make sure that the switch is put on the "off" file, check whether it is connected with circuit break or leakage, switch on the power, and turn on the power switch.
2. In use, the sample should not be placed too crowded, so as not to affect the convection in the furnace. When placing the furnace, please ensure that the furnace is effectively grounded to ensure safety.
3. When heating up, please do not splash water on the inspection window of the cabinet door, so as to avoid the glass from being cold and easy to burst.
4. This drying furnace is a non-explosion-proof product.
5. Volatile, inflammable and explosive articles should not be put into the furnace for heating in case of the explosion.
6. When using, please unscrew the air door at the back of the furnace according to the needs, so as to facilitate rapid drying.
Above is how to use the content of constant temperature drying furnace safely, if you have doubt, can consult our factory, GWL instrument welcome you!